THERMO 3 Thermal Cell for building materials

Description

Device for measuring thermal transfers full scale, through a vertical plane wall

The operating principle : The hot and cold enclosures are placed on either side of the wall to test…

Each enclosure is set with a temperature controlled (cold side : between +5°C and –10°C) and hot side (between +10°C and +30°C).

.

he display returns the following data :

• temperature gradient between the tested well faces
• energy loss through the wall
• energy loss caused by thermal bridges
• heat flux through the wall
• strength and thermal conductivity of the wall

 

Supplied with :

• one set of walls comprising of  :
  ► insulated panel
  ► insulated dry wall
•     ► double glazed bay
• a set of 8 digital temperature probes
• an acquisition unit for measuring temperatures and energy consumed
• A tactile display for configuration and vizualisation of measurement results
• le gradient de température entre les faces de la paroi en test
• la perte d’énergie à travers la paroi
• la perte d’énergie engendrée par les ponts thermiques
• le flux thermique à travers la paroi
• la résistance et la conductivité thermique de la paroi

Hot Zone :

• Insulated and ventilated
• Heating resistances 200W
• 8 numerical temperature probes
• Current and voltage are measured by the central processing unit and are used to calculate the active power of each zone

 

 

 

 

Cold Zone :

• Equipped with a refrigerating unit, an exchanger (cooling) connected to the cold zone and an exchanger (heat) connected to the outside.
• Zone is insulated and ventilated.
• 4 digital temperature probes.